Sunday, June 21, 2009

Progress Report

It has been a while since I updated this blog. This is mostly because nothing much was happening fast. It has taken a lot longer than we ever thought possible to get our house ready to sell or rent. Lots of maintenance items to be taken care of, like re-shingling, a new fence, painting the interior, etc, etc, etc. Sue has been working pretty steady throughout this time in an effort to build up the cruising kitty (or at least try to keep up with expenses).

We have finally managed to sort through and get rid of a lot of junk but it became obvious that we cannot part with it all. So, we are now the proud owners of a 20' sea container, which our good friends have generously allowed us to place on their property for an indefinite period of time.

We have started the task of transporting boxes of stuff to the container, which has only reinforced the feeling that we are never going to be able to see the end of it all - the amount of stuff two people can collect in the span of 25 years is staggering.

Last week, we paid a visit to the boat for the first time in two months. This was part of a brief driving holiday with Sue's mother, who had not as yet seen the boat or, as it turns out, been to the island for many years. We spent 5 nights in Nanaimo, showing her around our favorite spots and managing to get in one short day sail (with no wind to speak of).

Then we drove to Victoria where we did all of those touristy things that we never usually get around to, staying in a fancy hotel overlooking the harbour, taking a city tour and visiting Butchart gardens.

We had actually been to the gardens once before, on our honeymoon 26 years ago, and it was quite amazing to see it all again.

Now, we are back in Edmonton to try and wrap up this house stuff once and for all. Still no idea of how long this is all going to take...

Friday, April 10, 2009

Time Flying By

Well, my quick trip to the boat has, as usual, turned into a marathon session. When it comes to boats, nothing ever works the first time and nothing is ever done on time. It has now been close to a month since I got to Nanaimo.

The first week was primarily spent waiting for the finishing touches on the new autopilot and instrument installation (was supposed to be done by time I got here). The actual hardware installation looks good but the wiring to get everything interfaced seemed to be quite a challenge. I'm not sure what I would have ended up with if I had not been here to make it clear how I wanted things to work. It also fell to me to actually read the manuals to see how to get the mixture of brand name products to talk to each other (Boat gurus feel it isn't very macho to read the manuals). I did manage to save a few bucks by doing some of the grunt work of running wires myself.

Once we had everything talking nice, we took the boat out for a bit of a sea-trial in Departure Bay to set up some of the autopilot stuff. Everything appeared to be working ok at that time. Here are some pictures of the new instruments actually turned on.

New radar and chart plotter, NX2 multi-control instrument and Comnav autopilot controller.

New radome.

New mast-top wind transducer (Solar powered would you believe)

Next up, because of the lack of availability of the marine railway for the planned haul out, I arranged to get the boat hauled at Stones and was able to get the new thru-hull installed for the new depth, log and temperature transducer.

While the boat was out, I took the opportunity to clean up the prop and replace the zincs.

The bottom paint appears to be holding up pretty good so I decided to leave it till the fall, presumably before we starting heading south.

Now, for the last couple of weeks, I have been attempting to catch up on many of the other projects that have been accumulating in the job jar for the last few years.

I have finally got the SSB/Ham radio and tuner installed and working. Lots of fun running another 30 feet of copper strip for a better ground, and some substantial coax cable for the connections between the radio and the antenna tuner, etc.

To solve an ongoing issue with access to the VHF radio in the cockpit, I have bought and installed a new VHF radio with a spiffy wireless remote mike to allow us to use the radio from anywhere on board.

After years of procrastinating, I have also finally got a holding tank plumbed in properly. Trust me when I say you don't want to know any more details of this project.

Other minor fixes accomplished:

  • Took the life raft in for servicing.
  • Throttle creep issue solved with the addition of a small clamp on the throttle cable.
  • Replaced the failed temperature alarm sensor on the engine (discovered just how easy it is to get a soft brass fitting cross-threaded and totally screwed up, and subsequently now own a cool new thread file tool).
  • Replaced both of the failing engine room blowers.

Did I mention that nothing on a boat ever works for long

Sure enough, as soon as I tried testing the autopilot and stuff again, the new fluxgate compass is no longer being recognized by the autopilot. After trying a new compass with the same results, I am now waiting for a replacement main processor unit for the autopilot itself.

Apparently all this work on the boat has made my car jealous, so it decided to get into the act too. One of the rear brake calipers froze up and forced me to take it in and get both rear brakes completely rebuilt. Not an expense I really needed right now. But it did mean that I could not leave for Edmonton for Easter. Instead, I will attempt to spend my time productively, diving into the endless list of things to be done on the boat. On this note, I have ordered a new "Pactor" modem for the SSB radio that will allow us to receive emails, weather faxes, etc. while on the high seas. Sounds like another fun wiring project.

Meanwhile, Susanne is busy back at the house, boxing up all of our worldly possessions to be put into storage. And working hard to help pay for all of the aforementioned equipment and repairs. Actually, I think I got the easy job.

Thursday, March 12, 2009

Autopilot progress

Some good progress has been made on the autopilot project. Most of the hard work has been done but there is a delay (with boats there is always a delay) due to lack of availability of the haulout railway. What has been done so far looks excellent but there are some unfinished issues for which the boat has to be out of the water.

New instruments appearing in the cockpit.

Nice beefy looking stainless steel mounts for the new autopilot.

Instead of waiting a couple of weeks to see if the railway becomes available, I am going to return to Nanaimo next week and move the boat back to our marina to complete the work myself as best I can. Maybe even save a few bucks in the process? We'll see.

Tuesday, February 24, 2009

WInter Won't Let Go

I guess it is still just February, but it sure would be nice if winter would let up some.

It has been fairly cold this last week and the snow is accumulating again. Just more incentive to leave it all behind as soon as possible.

But just when you think it is never going to end, we got our annual visit from the Cedar Waxwings, dining voraciously on our mountain ash berries.

If they can survive through the winter, I guess we can too.



Note: Apparently work on the boat is progressing smoothly and I expect a more thorough update in about a week's time.

Sunday, February 15, 2009

Long Drive and Big Money

No, this is not about golf!

After what seems like years of searching, I have found someone who says they can put a real autopilot into our boat. For those of you who are not boaters, you probably have no idea why we would want one. For those of you who are boaters, you probably wonder why we don't have one already.

Basically, having an autopilot on a long passage is almost a must, as no-one wants to hand steer for weeks on end, 24 hours a day. Up till now, we have used a "wheel" pilot (just a motor and belt that drives the steering wheel). These types of autopilots are generally not able to handle a boat the size of ours, particularly under sail, and we can confirm that that is the case. We want a more powerful, below deck. autopilot with lots of powerful hydraulics and smart software. The problem has been that this boat has very little room in which to mount such an item, and everyone who has looked at it so far has been unwilling to attempt it (or in some cases even look at it). I certainly did not have a clue how to go about it either.

Enter the folks at Nanaimo Ship Yard ( http://www.nanaimoshipyard.com/ ). They actually came and looked at the problem and instead of running away, they came up with a plan. And they said they could start work on it right away (pretty much unheard of in the marine world).

So, not to let this opportunity slip by, I rushed back to the boat and we immediately moved it to their docks where they will have more of a problem ignoring it. They offered to put us into one of their slips free of charge for as long as it takes, so that should be some incentive for them to get it done. (Pictures courtesy of our good friends, and fellow boat trash, Barry and Hazel)

The big money comes in with the cost of this miracle from heaven. Lots of labour and custom fabricating. Plus the fact that if I have a working autopilot I would also like a complete set of working instruments to go with it. Chartplotter, Radar, Wind instruments etc. So I have dropped the whole project in their laps.

They want the boat for a month and we really can't stay on the boat in their marina, so we made a hasty retreat back to Edmonton. This is where the long drive comes into play. Not having gone that way for a couple of years, we elected to take the long way back via highway 1 and Banff. Who knew that a town like Revelstoke would be completely booked up with Snowmobilers and Skiers to the point that no accommodations would be available within 150 km. So it was that we found ourselves driving the usually scenic Rogers and Kicking Horse passes in the dark - the only company being the non-stop semis going the other way on the twisty, treacherous two-lane road.

So the short version is that we are in Edmonton for at least a month and will hopefully be going back to a boat fully prepared to take us anywhere when we return.